- Shipping costs and lead times vary
- 302 Cubic Inches
- 340 HP
- 9.0:1 compression ratio (nominal)
- Forged pistons
- Forged steel connecting rods
- BOSS 4-bolt main block M-6010-BOSS302
- Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake and exhaust
- Double roller timing chain set M-6268-A302
- Forged steel crankshaft
- Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
(Rear sump pan fits most Fox body cars) - Ford Performance aluminum M-6049-X2 cylinder heads
- Roller rocker arms
- Does not include intake manifold or distributor (MSD distributor part no: M8598 recommended)
- Does not include water pump
- Built with all NEW Parts
- Note: Results obtained using Edelbrock® Performer RPM AirGap intake and 570cfm carburetor.
-
INSTALLATION NOTES: Some or all of the following items may need to be changed from your original engine or modified for proper installation:
- Depending on your application, a different timing cover, oil pan and pickup may be required
- Timing cover will work with most standard rotation water pumps
- Engine has a rear sump oil pan and pickup, standard rotation timing cover and non-EFI valve covers
- Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
- Valve covers M-6582-W351PR should fit most non-EFI applications. Optional valve covers sold separately
- The damper M-6316-D302 may require a spacer for pulley alignment
- Flywheel included - M-6375-D302B, will work for most 157-tooth manual transmission applications. For other transmissions use the proper neutral balance flywheel.
- Intake manifold not included
- Includes intake gaskets M-9439-A50 as well as pilot bearing
- Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order)
- Steel distributor gear required
- Shipping weight approximately 525 lbs
- Built with current available parts. Photo and specs may vary.
- Engine installation and tuning tips can be found HERE
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
