Ford Racing 5.0L Gen 3 Coyote Aluminator NA Crate Engine M-6007-A50NAB
- Shipping costs and lead times vary
Ford Performance has taken the Gen 3 Mustang GT 5.0L Coyote engine and created another in its series of "Aluminator" crate engines built to deliver higher performance. The 5.0 Aluminator NA is built with connecting rods and pistons designed specifically for high performance applications. Mahle® 12.0:1 compression ratio forged pistons are hard anodized and feature Grafal® low friction coating. The connecting rods are premium Manley ® H-beam with ARP® 2000 bolts. The Gen 3 5.0L Aluminator NA is a direct bolt in for 2018-2021 Mustang GT.
-
Fits 2018-2021 Mustang GT
-
5.0L (302 cubic inches)
-
12.0:1 compression ratio (nominal)
- 460 horsepower @ 7,000 rpm
- 420 ft.-lb. torque at 4,600 rpm
-
Mahle® Hard Anodized forged pistons with Grafal® low friction coating
- Manley® H-beam connecting rods with ARP® 2000 bolts
-
Forged steel crankshaft
-
Uses production 2020 Mustang GT aluminum block
- 10 quart oil pan
-
Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body variable runner control
- Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction.
- Mustang GT production camshafts
-
Includes Ford Performance colder, heat range zero (0) spark plugs, M-12405-M50A
-
Includes Ford Performance oil filter - M-6731-FL820
-
Includes billet steel gerotor oil pump gears M-6600-M50A
- Vehicle harness and PCM not included. Use Ford Performance wiring, PCM and installation kit M-6017-M50B designed for manual transmission street rod/project car installation. Can also be equipped with automatic transmission controls pack - see M-6017-M50BA more information.
-
Does not include alternator, for alternator kit see M-8600-M50BALT or M-8600-M50ALTA
- Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
- Does not include exhaust manifolds
-
Coyote Crate Engine Technical Reference Guide
- See an Aluminator Engine build-up here
- See a Gen 3 Aluminator article here
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
