TREMEC MAGNUM XL TRANSMISSION KIT M-7003-M6XL
- Shipping costs and lead times vary
- Gear Ratios
- 1st gear = 2.97, 2nd gear = 2.10, 3rd gear = 1.46, 4th gear = 1.00, 5th gear = .80, 6th gear = .63
- Trans mount isolated shifter and shift ball
- 700 lb-ft torque capacity
- New extended length tail section designed to eliminate the semi-remote shifter
- SFI-approved steel bellhousing
- Reuses the OEM hydraulic clutch relase system.
-
Includes swap-specific steel crossmember and OE-quality rubber transmission mount,
NOTES:
Users will need to convert to a 26-spline clutch disc and 1-piece 31 spline slip yoke style prop shaft (not included).
Magnum XL transmissions are designed to accept the factory hydraulic release bearing from a 2005-current Mustang GT.
GT500 bearings may also be used but will require a custom adaptor to maintain proper stack up (not included).
2005-2010 Mustang applications are a direct plug-and-play with regards to the speedometer.
2011-2014 models will require speedometer recalibration via ECU tuning or a separate plug-in signal converter from sine to hall-efffect signal, such as the Abbott Enterprises ERA or Dakota Digital SGI-1 (Not included)
2015-2019 model installation kits are not currently available.
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
