- Shipping costs and lead times vary
Just like the fully built-up engines, Aluminator Short Blocks are hand assembled and use Manley® connecting rods with ARP® rod bolts and Mahle® forged pistons. Two versions are available – 9.5:1 and 12.0:1 compression ratio.
These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs.
Ford Performance Engineers have taken care of the toughest part of building a new engine by designing a strong and durable Short Block that offers a wide range of power possibilities. And every Ford Performance Aluminator Short Block is precision internally balanced and hand assembled in the U.S. with performance clearances.
Ford Performance offers a number of components to finish the build.
Specs: Aluminator Short Block M-6009-A50NAB
- 5.0L - 302 cubic inches
- 12.0:1 compression ratio (nominal)
- For 9.5:1 compression ratio version see M-6009-A50SCB
- Mahle® hard anodized forged pistons with Grafal® low friction coating
- Manley® H-beam connecting rods with ARP2000 bolts
- 2018+ (Gen 3) Production aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
- Forged steel crankshaft
- Fits Gen 1, 2, 3, or 4 and GT350 cylinder heads with corresponding generation head gasket
- Assembled and ready for your Coyote heads, cams, timing set, and oil system
- M-6675-M52 oil pan/pump or M-6675-M52S oil pan/pump recommended
- M-6675-M50A1 oil pan with BR3Z-6622-A pick-up (Ford service part) and M-6600-50CJ billet oil pump recommended
- Fully compatible with 2024+ Mustang 5.0L oil pan/pump/pick-up
- Cams larger than 14mm lift require checking piston to valve clearance
- Photo and specs may vary
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
