- Shipping costs and lead times vary
Ford Sealed Racing Engines are built to professional racing series standards and deliver reliable lasting performance. These aren't built from repackaged production parts, but real racing parts like Forged Crank, Rods and Pistons with full floating piston pins. Each engine is assembled by hand with racing clearances. Built with the Ford Performance BOSS 302 block these engines deliver reliable and consistent performance lap after lap.
- Built for asphalt and dirt circle track racing series that require a sealed racing engine
- 347 cubic inches - 4.030" bore - 3.400" stroke
- BOSS 302 race block
- 415 hp @ 6000 rpm 400 lb-ft @ 4900 rpm (with headers, and a 650 CFM Holley carburetor not included)
- 10:1 Compression ratio (nominal)
- SCAT® forged crankshaft
- SCAT® forged steel cap screw connecting rods
- Mahle® forged pistons with floating pins
- Hydraulic roller camshaft M-6250-F303, .528'' lift intake and exhaust, duration at .050" is 226 degrees intake and exhaust
- Double roller timing chain set M-6268-A302
- High-performance 7 quart rear sump circle track oil pan
- Ford Performance aluminum "Z" cylinder heads M-6049-Z304DA with 2.02" intake valves and 1.60" exhaust valves
- PAC® 1219X ovate beehive valve springs
- 1.65:1 ratio roller rocker arms
- Edelbrock® Victor Jr. intake manifold M-9424-D302
- Edelbrock® Water Pump
- SFI approved vibration damper
- MSD® billet distributor
- ARP® Head Studs
- "Ford Racing" polished aluminum Circle Track valve covers M-6582-CT2
- Ford Performance M-6600-D2 High volume oil pump
- Engine is sealed for circle track competition where rules allow
- Engine weight as equipped is 431 lbs. (includes 7 quarts of oil)
- Competes directly with the GMPP® "604" crate engine.
- Engine is internally balanced, "0" balance flywheel required
- Flywheel is not included
- INSTALLATION NOTES: See engine installation and tuning tips. Some or all of the following items may need to be changed from your original engine or modified for proper installation:
- This engine has a rear sump performance oil pan and pickup, regular rotation timing cover and regular rotation water pump, and non-EFI valve covers. Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be required. See installation notes
- Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump
- A standard rotation water pump is installed on the engine. Other applications may require different water pumps and timing chain covers
- Damper M-6316-D302, may require a spacer for pulley alignment.
- Ford Performance flywheel M-6375-D302B not included but will work for most 157-tooth manual transmission applications.
- Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order).
- Built with current available parts.
- Photo and specs may vary.
- Shipping weight approximately 475 lbs.
- Race Application-no warranty
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
