2024-2026 Ford Mustang 5.0L S650 Stage 1 Gen 6 3.0L Whipple Supercharger Kit - 50-State Legal
WK-2640-S1-30
- Contact to get ETA before purchasing
WHIPPLE GEN 6 3.0L STAGE 1 SUPERCHARGER SYSTEM FOR 2024–2026 FORD MUSTANG 5.0L S650 – 50-STATE LEGAL
UP TO 810 HP / 640 TQ • OEM DRIVEABILITY • CARB EO APPROVED
- 2024-2026 Ford Mustang 5.0L
- Delivers up to 810HP and 640 lb-ft of torque with optimized airflow and calibration
- Massive Y-intake system with dual filters and 120mm inlet for maximum air velocity
- Advanced 3.0L Gen 6 twin-screw design boosts performance across the entire RPM range
- Dual-pass intercooler core chills air twice, ensuring cooler, denser intake charge
- Compatible with both Left-Hand Drive and Right-Hand Drive 2024–2026 S650 Mustangs
- CARB certified and 50-state legal
The Whipple Stage 1 Supercharger System for the 2024–2026 Ford Mustang S650 (GT & Dark Horse) pairs the latest Gen 6 3.0L twin-screw with high-flow intake hardware and OEM-grade calibration for incredible, street-legal performance. Expect up to 810 HP and 640 lb-ft with smooth drivability and full 50-state emissions compliance.
Engineered for the S650 Platform: The inverted Gen 6 layout delivers a factory-fit install under the stock hood with no cutting or grinding. Plug-and-play wiring and OEM quick-connect fittings streamline the process for a clean, serviceable build.
Unleash Enhanced Airflow: Dual high-flow air filters feed an oversized Crusher™ Y-tube and a 120 mm supercharger inlet, compatible with 92 mm, 112 mm, and 120 mm throttle bodies. The result is faster tip-in response and more power across the curve.
Gen 6 Supercharger Technology: Whipple’s 3x4 rotor combo and optimized port geometry cut parasitic loss and lower discharge temps versus previous generations—delivering more usable power per psi.
Advanced Dual Cooling Technology: A patented dual-core, dual-pass intercooler routes the charge through each core twice for exceptional thermal control. Paired with an oversized heat exchanger and high-flow intercooler pump, IATs stay consistent pull after pull.
Precision Calibration: Supplied Tomahawk V2 flash tool and CARB-approved calibration maintain OEM safeguards while maximizing performance, idle quality, and part-throttle manners.
Included in the Kit:
- Gen 6 3.0L Whipple twin-screw supercharger (inverted layout)
- Patented dual-core, dual-pass intercooler system
- Dual high-flow air filters with oversized Crusher™ Y-tube inlet
- High-flow intercooler pump and oversized heat exchanger
- Billet fuel rails and plug-and-play wiring harness
- Tomahawk V2 flash tool with Whipple calibration
- All required mounting hardware
Exclusive Features:
- 50-State Emissions Legal – CARB EO approved calibration
- Fits both LHD and RHD S650 Mustangs
- Instant boost with a flat torque curve
- No hood, K-brace, or block cutting required
- Proven 6-rib belt drive with HD tensioner (optional 10-rib available)
- OEM quick-connect fittings; plug-and-play sensors
- Available finishes: textured black, polished, Ford textured blue, or custom
*Dark Horse reference figures. GT models with lower-flowing exhaust typically see 8–12 HP less.
**Power ratings achieved on 93-octane fuel under optimal conditions. Results vary by fuel, conditions, and dyno type.
Note: This system is CARB Executive Order (EO) approved and 50-state emissions legal when installed as supplied with Whipple’s certified calibration.
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.