2024-2026 Ford F-150 5.0L Gen 6 Stage 2 Whipple Competition Supercharger Kit
WK-2317-STG2-30C
- Contact to get ETA before purchasing
WHIPPLE GEN 6 3.0L STAGE 2 COMPETITION SUPERCHARGER SYSTEM FOR 2024–2026 FORD F-150 5.0L
UNLOCK UP TO 805 HP AND 685 TQ*
- Fits 2024–2026 Ford F-150 5.0L Coyote V8
- Stage 2 Competition Kit – Up to 805 HP / 685 TQ*
- Gen 6 3.0L Whipple Twin-Screw Supercharger
- 132mm Billet Roval Throttle Body + Billet Fuel Rails
- Dual-Pass, Dual-Core Intercooler + Massive Heat Exchanger
- Plug-and-Play Wiring, Billet Idler System, and Mounting Hardware
- For off-road/racing use only – No injectors, tuning device, or CARB EO
Whipple’s Stage 2 Competition Supercharger Kit, designed for the 2024–2026 5.0L Coyote-powered F-150, features the latest Gen 6 3.0L twin-screw technology, oversized intercooler system, and billet components to deliver maximum airflow and cooling capacity for serious off-road and racing applications.
Engineered for the 2024–2026 Platform: The updated Gen 6 design is purpose-built to fit the latest F-150 engine bay. The inverted supercharger nests between the heads for a factory-style fit under the stock hood — minimal modifications required. The Stage 2 configuration adds Whipple’s high-flow 132mm billet Roval throttle body for enhanced airflow and power potential.
Unrivaled Cooling Technology: Whipple’s patented dual-pass, dual-core intercooler system forces air through each core twice, delivering unmatched thermal efficiency. Paired with the industry’s largest dual-pass heat exchanger and high-flow pump, intake temps remain consistent even under extreme load.
Included in the Kit:
- Gen 6 3.0L Whipple Twin-Screw Supercharger
- 132mm Billet Roval Throttle Body
- Billet Fuel Rails
- Built-in Air-to-Water Intercooler System
- Oversized Dual-Pass Heat Exchanger + High-Flow Intercooler Pump
- Plug-and-Play Wiring, Billet Idler System, and Mounting Hardware
Exclusive Features:
- Competition-only system – Not CARB certified, not 50-state legal
- Patented dual-core intercoolers – each used twice for superior cooling
- Whipple 3x4 rotor profile for increased RPM capacity and airflow
- Oversized 150mm Crusher™ inlet for maximum air volume
- Fully sealed, inverted design for factory-like appearance and fitment
- Instant boost at throttle tip-in with a flat torque curve
- Quick-change pulleys and easy belt servicing
- OEM quick-connect fittings and plug-and-play sensors
- Available in black, polished, Ford textured blue, or custom finishes
*Horsepower and torque figures are based on Whipple’s Stage 2 complete system with injectors and calibration. Actual output will vary depending on custom tuning, fuel, and supporting modifications.
Important Notice: This competition supercharger system does not include injectors, tuning device, or PCM calibration. It is intended for off-road and racing use only. Not legal for sale or use on pollution-controlled motor vehicles.
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY.
LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.
THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES. CUSTOMERS IN OTHER COUNTRIES SHOULD FOLLOW THEIR LOCAL LAWS AND REGULATIONS.
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.