- Shipping costs and lead times vary
Whipple 3.0L Gen 6 Stage 2 SC Kit For 2024 Ford F150 5.0L
50 STATE LEGAL BOLT-ON POWER
If you're looking for the most advanced, powerful and high-quality system on the market, your search ends here! Whipple Superchargers has set a new standard for bolt-on power with the all-new Stage 2 Supercharger system for the Ford F150, featuring the new Gen 6 3.0L Whipple twin-screw supercharger. The Stage 1R system installs on the factory engine without any cutting or grinding and is designed for 91 or higher octane fuel. It utilizes the maximum flowing billet 132mm roval throttle body and upgrades the fuel system from Stage 1 with high-flow Bosch fuel injectors. The Stage 2 system delivers up to 685* foot-pounds of torque and 805* horsepower to the flywheel, providing tire-shredding performance!
For 2024, our engineering team designed an all new, updated Gen 6 Whipple twin-screw supercharger. While the Gen 6 pushed vehicles to incredible power gains, the Gen 6 goes beyond this with the all new Whipple G6 rotor profile and redesigned inlet port for improved airflow capacity. The system features the inverted supercharger, which nestles the supercharger in the valley of the block. The air goes through the massive patented dual pass dual intercoolers for industry leading thermal efficiency, then down through the intercoolers again, then down the runners for mind blowing performance. Not to be confused with dual intercoolers, the Whipple design uses each intercooler TWICE, allowing incredible thermal efficiency not offered with any other SC system. Couple that patented system with the industry's largest, dual pass heat exchanger and high flow intercooler pump, you have incomparable temperature control.
Nobody puts more time and resources into the development then Whipple. The proof is in the product, more power per lb of boost than any other system. The key to making such incredible reliable power is in the Whipple unique twin screw supercharger, massive air-to-water intercooler, oversized Crusher air system and innovative PCM programming that keeps the power-train safe and secure. Whether you’re looking for a daily driver that needs a little more punch or you’re craving a tire-frying, rubber shredding street machine, the Whipple Supercharger systems delivers like no other SC system today. Power from tip in to redline, the new Whipple SC system makes incredible power across the entire rpm range while maintaining industry leading drive-ability. Each Whipple system comes with the new Whipple flash tool which allows each customer to load the calibration into the PCM, read and erase codes and the ability to customize wheel/axle sizes.
With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration using special supercharger based software (a Whipple exclusive) that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM constantly monitors the engines torque output while monitoring many different parameters to keep the engine in it’s ideal parameters. If a parameter falls below specification, the PCM will lower boost and torque output until the problem can be cured. No other calibration in the field has such technology, giving the Whipple SC system unheralded performance and reliability.
Today's F150's are speed density based and coupled to a new advanced 10-speed transmission, nearly impossible to calibrate with aftermarket tools. Whipple, with its proprietary software adds a 3-bar map sensor to measure manifold pressure under boost, along with an air temp sensor to properly vary spark advance at all different rpm points. The 10-speed transmission is recalibrated to keep the engine in its peak torque range at nearly all RPM points along with keeping the off road, tow, eco and sport modes available so the user keeps all available options.
Exclusive Features:
- 50 State Legal EO #D-231-110
- Works with new OTA style PCM
- Patented dual pass dual core intercooler design for nearly twice the area of any other intercooler on the market
- GT500 Bosch dual beam fuel injectors
- No other upgrades required, just massive power right out of the box
- Front entry Gen 6 W185ax (3.0 liters/3000cc) Whipple twin-screw supercharger that significantly outperforms competitions 2.3L and 2.65L roots-type systems
- Gen 6 supercharger features new 3x4 rotor combination for increased RPM capacity, large diameter for increased airflow and small leak path, increased helix for optimal sealing
- Oversized Crusher™ 150mm inlet for maximum airflow capacity and minimal rotor cavitation
- Inverted design allows for massive, oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more power at lower boost
- Massive air-to-water aluminum bar-plate intercoolers offer more cooling than any other positive displacement system available, nothing comes close
- High flow intercooler pump, nearly double the flow of the standard units others use
- Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
- Included OBDII Whipple Tomahawk V2 flash tool
- Tomahawk allows wheel/tire and axle changes (a Whipple exclusive)
- Exclusive 3x4 rotor combo for significant increase in airflow under the curve than less efficient 4x4 roots
- Extra plenum volume below intercooler core for far less pressure drop and better use of the increased surface area of the massive intercooler core
- More boost at the "hit" than any other twin-screw
- Flat torque curve for incredible acceleration
- Largest dual pass heat exchanger on the market as standard for incredible intercooler water temps
- Fits under factory hood with no modifications
- Kits come complete with all necessary parts and hardware for installation
- Plug and play wiring with male and female connections
- Proven 6-rib belt system and adjustable idler system
- OEM quick connect fittings for easy installation
- Available in wrinkle black, polish, Ford textured blue or any custom color
- Instant boost at the touch of the throttle
- 3 minute pulley changes
- Easy belt changes
- Lightweight pocketed 6061 T6 billet aluminum SC pulley
*Power is under optimal conditions with 93 octane fuel. Results may vary due to conditions, octane and dyno type.
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
