- Shipping costs and lead times vary
INTAKE TUBE WITH MOLDED IN MAF. J&L's 2018-2023 Cold Air Intake is better than ever. Fully computer designed to optimize space and for best fit and finish. Large 5" filter inlet with radiused end for smooth air flow across the MAF. MAF size is 120mm. Tube measures 4.5" at the throttle body side in preparation for larger after market throttle bodies.
HEAT SHIELD: Fully Roto molded heat shield and included fresh air duct to the grille designed to keep inlet air temps as cool as possible.
AIR FILTER: We use only the best air filters made by S&B to our specifications. We love S&B's tapered flange design and Powerstack filtered ends. With a huge 5” opening on the tube we needed a huge filter. The result is a monster 5x7” filter with built in bellmouth for more airflow.
TUNING: A J&L specific tune is required with this kit.
EASY INSTALLATION: The design, instructions and online video (see Video / Installation Tabs) helps make this an easy install.
KIT INCLUDES:
• J&L Black Textured Intake Tube
• 5x7 S&B Powerstack Air Filter Red Oil
• Heat Shield with duct
• HD Clamps & all needed hardware
MAINTENANCE: To properly clean your oil filter, we recommend the S&B Precision II Cleaning & Oiling Kit. *TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.
J&L Pre-Filters are now available for most intake kits we carry, these filters are made for us by Outerwears, these prefilters are water repellent. They will increase your filter life and cut down on your cleaning intervals! For more information check the product page here J&L Air Filter PRE FILTER
* This product is NOT CARB (California Air Resource Board) Exempt.
Fitment:
- 2018 Mustang GT
- 2019 Mustang GT
- 2020 Mustang GT
- 2021 Mustang GT
- 2022 Mustang GT
- 2023 Mustang GT
Shipping costs and lead times can vary, use the contact form below to confirm order cost and timeframe.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at brian@paulsautomotiveengineering.com. Please note that returns will need to be sent to the following address: 9750 Conklin Road Blue Ash, OH 45242
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at brian@paulsautomotiveengineering.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. If we do not receive notice within 7 days of receiving order, we cannot process return.
Exceptions / non-returnable items
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at brian@paulsautomotiveengineering.com.
